User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
372
Name Function
1 Compander Curve Displays results graphically. The horizontal axis is
the input signal level, and the vertical axis is the
output level.
2 Gain Reduction Meter Displays the gain reduction attenuation.
3 Output Meter Displays the output signal level.
Parameter Setting Range Function
4 Threshold -54 dB to ±0 dB Sets the threshold value.
5 Ratio 1:1 to ∞:1 Sets the compression ratio.
6 Width +1 dB to +90 dB Sets the width of the expander.
7 Attack 0 to 120 ms Sets the attack time.
8 Release 44.1 kHz: 6 ms to 46 s
48 kHz: 5 ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
Sets the release time.
The setting range may very, depending on the
operating frequency.
9 Gain -18 dB to ±0 dB Sets the output gain.
) KeyIn Mono SELF
KEYIN
Selects the trigger source from a menu. The
currently selected trigger source is displayed on the
button.
Stereo L
R
LR BOTH
KEYIN
! On ON/OFF Turns the compander ON.
–70
–60
–50
–40
–30
–20
–10
0
+10
+20
–70 –60 –50 –40 –30 –20 –10 0 +10 +20
Input Level (dB)
Output Level (dB)
Width=25
Ratio=4:1
Threshold=–25dB