User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
404
■ Output Master
If you click the [Output Master] button in the delay matrix component editor, it will open the [Delay
Matrix - OutputMaster] editor window. Here you can turn the master output for each channel ON
and OFF and set the level.
Section Parameter Setting Range Function
1 Output Meter -- Displays the output signal level for each channel.
2 Level -∞ to +10 dB Sets the output signal level for each channel.
3 On ON/OFF Turns ON each channel’s output.
4 Block On -- Turns ON output for all channels in the Output
Master window. When turned ON, the [On] button
lights up.
5 Off -- Turns OFF output for all channels in the Output
Master window.
6 Nominal -- Resets all output signal levels in the Output Master
window, making them 0 dB.
7 Minimum -- Resets all output signal levels in the Output Master
window, making them -∞ dB.
4
5
7
6
2
1
3
[Delay Matrix - OutputMaster] editor window