User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
411
■ Input Master
If you click the [Input Master] button in the matrix mixer component editor, it will open the [Matrix
Mixer - InputMaster] editor window. Here you can turn the master input for each channel ON and
OFF and set the level.
Section Parameter Setting Range Function
1 Input Phase ON/OFF Reverses the phase of each channel’s signal.
2 Level -∞ to +10 dB Sets the signal level from each channel input to the
output bus.
3 Solo ON/OFF Turns ON solo for each channel. If Solo is engaged
for even one channel, all non-Solo channels will be
muted.
4 On ON/OFF Turns ON each channel’s input.
5 Block On -- Turns ON input for all channels in the Input Master
window. When turned ON, the [On] button lights up.
6 Off -- Turns OFF input for all channels in the Input Master
window.
7 Nominal -- Resets all output signal levels in the Input Master
window, making them 0 dB.
8 Minimum -- Resets all output signal levels in the Input master
window, making them -∞ dB.
5
6
8
7
1
3
4
2
[Matrix Mixer - InputMaster] editor window