User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
412
■ Output Master Window
If you click the [Output Master] button in the matrix mixer component editor, it will open the Output
Master window. Her you can turn the master output for each channel ON and OFF and set the level.
Section Parameter Setting Range Function
1 Output Meter -- Displays the output signal level for each channel.
2 Level -∞ to +10 dB Sets the output signal level for each channel.
3 On ON/OFF Turns ON each channel’s output.
4 Block On -- Turns ON output for all channels in the Output
Master window. When turned ON, the [On] button
lights up.
5 Off -- Turns OFF output for all channels in the Output
Master window.
6 Nominal -- Resets all output signal levels in the Output Master
window, making them 0 dB.
7 Minimum -- Resets all output signal levels in the Output Master
window, making them -∞ dB.
4
5
7
6
1
3
2
[Matrix Mixer - OutputMaster] editor window