User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
415
■ Crosspoint
If you click a level meter in the matrix mixer component editor, the output crosspoint window for the
group will be displayed. Turns the input channels ON and OFF and sets their levels. Just like the
matrix mixture component editor, the input channels are arranged vertically while the output
channels are arranged horizontally.
Section Parameter Setting Range Function
1 Input Channel -- Switches to another channel group.
2 Output Channel -- Switches to another channel group.
3 Bus Send Level Level -∞ to +10 dB Sets the output signal level for each crosspoint.
4 On ON/OFF Turns ON output for each crosspoint.
5 Block On -- Turns ON output for all channels in the Crosspoint
window. When turned ON, the [On] button lights up.
6 Off -- Turns OFF output for all channels in the Crosspoint
window.
7 Nominal -- Resets all output signal levels in the Crosspoint
window, making them 0 dB.
8 Minimum -- Resets all output signal levels in the Crosspoint
window, making them -∞ dB.
5
6
8
7
1
2
3
4
[Matrix Mixer - Crosspoint] editor window