User Manual

2. Command List
Commands Notified to Remote Controller from the DME
No.
1 PRM To notify a parameter change
2 VOL To notify a parameter change
3 SCN To notify scene recall
4 CSN To notify a scene recall number
5 SNM To notify a scene name
6 Level Meter MTR To notify a meter position
7 Mute Control MUTE To notify mute set/cancel
Commands for Controlling the DME
No.
8 SPR
To set a parameter
9 SVL
To set a parameter (curve table method)
10 RSPR
To relatively set a parameter
11 RSVL
To relatively set a parameter (curve table method)
12 GPR
To obtain a parameter
13 GVL
To obtain a parameter (curve table method)
14 RSC
To recall a scene (assigning a scene number)
15 RRSC
To recall a scene (assigning a relative value)
16 GCS
To obtain a current scene number
17 GSN
To obtain a scene name
18 GMT
To obtain a level meter position
19 GCMT
To set cyclical obtaining of a level meter position
20 QCMT
To stop cyclical obtaining of a level meter position
21 SMC
To set the cyclical period for obtaining a level meter position
22 SMUT
To set/cancel mute
23 GMUT (*1)
To obtain mute condition
24 GPI Control SGO
To control GPI OUT
25 PWF
To play back a file
26 SWF (*1) To stop playback of a file
Utility Commands
No.
27 For debug ECHO To set/cancel echo back
*1 Available only for DME firmware V3.11 or later
WAV FILE PLAYER Control
Scene Control
Category Command Definition
Parameter Control
Command
Category Command Definition
Parameter Control
Scene Control
Category Definition
Level Meter
Mute Control
DME Remote Control Protocol Specifications V3.1
5