User Manual

2. “Select Firmware Version” dialog box will appear after the progress bar is shown for a
while as shown below.
3. Check that the firmware version you wish to update is selected in the “Compatible
Firmware Versions” field in the “Select Firmware Version” dialog box.
When you wish to update MY16-CII, check that “YAMAHA-MY16CII version x.x.x” is
selected (x.x.x represents the version number; the example below is 2.11.6).
4. Click [Update] to start updating. The following progress bar will be shown while
updating.
Caution: Do not turn the power off while this progress bar is shown on the display. Never
turn the power off during updating, since this may damage the firmware and cause the
device to malfunction.
CobraNet Interface Update Guide
10