User Manual

1.3. Installation and Default Setting of CobraNet Discovery

Follow the instructions below to install CobraNet Discovery and make the default settings.

1. Download the installer of the CobraNet Discovery from the following Cirrus Logic, Inc

website and install.

http://www.cirrus.com/dispatch/forms/sup/boardreg/breg/BregController.jpf

2. Copy the firmware you wish to update to the following folder.

C:╲Program Files╲Cirrus Logic╲CobraNet Discovery╲firmware

Above folder name differs if you change the desired destination of CobraNet Discovery from

the default setting.

Firmware file names depend on the devices.

Device Firmware File Name

ACU16-C / NHB32-C acu16_x_x_x.bin

MY16-C my16c_x_x_x.bin

MY16-CII YAMAHA-MY16CII_x_x_x.bin

DME8i-C/DME8o-C/DME4io-C YAMAHA-SATELLITE_x_x_x.bin

“x_x_x” represents the version number

Caution: Do not update firmware provided by a third party other than Yamaha. Updating

firmware for different devices or firmware provided by a third party other than Yamaha may

cause your device to become unstable.

3. Select [All Programs | CobraNet Discovery | CobraNet Discovery] from the “Start” menu

to launch CobraNet Discovery.

CobraNet Interface Update Guide