Owner's Manual
Table Of Contents
- Foreword
- Introduction to the DME64N/24N
- The Controls and Connectors
- Preparation
- Connecting to a Computer
- Audio I/O Connection
- Connecting to an External Device
- Panel Operation and Displays
- Basic Operation
- Main Display
- Parameter Edit Displays
- Spectrum Display
- Level Meter Display
- Initializing the DME64N/ DME24N
- Utility Displays
- Items accessible via the Utility display
- Utility Display Operation
- Info Page
- Network Settings (Net) Page
- Display Setup (Disp) Page
- Security Setup (Lock) Page
- Miscellaneous Setup (Misc) Page
- Word Clock Setup (WCLK) Page
- Slot Information (Slot) Page
- MIDI Setup (MIDI) Page
- GPI Setup (GPI) Page
- Head Amplifier Setup (HA) Page
- Cascade Setup (CASCAD) Page
- Check Page
- References
- Index
Panel Operation and Displays
Basic Operation
DME64N/DME24N Owner’s Manual
33
Basic Operation
By pressing the panel keys it is possible to select the DME64N/24N Main display, Utility display, and Parameter Edit displays
that allow individual settings to be edited and changed. refer to the pages listed below for more detailed information about
each display.
[HOME] key ➔ Main Display (page 34)
The Main display can be directly recalled from any display other than the Main display by pressing the
[HOME] key. The Main display shows the current scene information
[HOME] key ➔ User Defined Button Page Selection (page 37)
Pressing the [HOME] key while the Main display is shown sequentially selects the four User Defined Button
pages.
[MUTE] key ➔ Mute Display (page 38)
[LEVEL] key ➔ Output Level Display (page 38)
[SCENE] key ➔ Scene Recall Display (page 38)/Scene Store Display (page 39)
These keys can be pressed from the Main or Utility displays to directly call the related parameter edit displays.
[MONITOR] key ➔ Monitor Point Selection Display (page 39)
This function is useful for level monitoring. When the key is pressed the monitor point selection display will
appear, and the spectrum analyzer display will appear when a selection has been made.
[UTILITY] key ➔ Utility Display (page 43)
The Utility display appears when the [UTILITY] key is pressed for longer than two seconds while the Main
display is showing.
The Utility display includes a number of pages that can be selected in sequence by repeatedly pressing the
[UTILITY] key.
Panel Operation and Displays
HOMEHOME
HOMEHOME
Main display
Switches the pages of the User Defined Button