Owner's Manual
Table Of Contents
- Foreword
- Introduction to the DME64N/24N
- The Controls and Connectors
- Preparation
- Connecting to a Computer
- Audio I/O Connection
- Connecting to an External Device
- Panel Operation and Displays
- Basic Operation
- Main Display
- Parameter Edit Displays
- Spectrum Display
- Level Meter Display
- Initializing the DME64N/ DME24N
- Utility Displays
- Items accessible via the Utility display
- Utility Display Operation
- Info Page
- Network Settings (Net) Page
- Display Setup (Disp) Page
- Security Setup (Lock) Page
- Miscellaneous Setup (Misc) Page
- Word Clock Setup (WCLK) Page
- Slot Information (Slot) Page
- MIDI Setup (MIDI) Page
- GPI Setup (GPI) Page
- Head Amplifier Setup (HA) Page
- Cascade Setup (CASCAD) Page
- Check Page
- References
- Index
Panel Operation and Displays
Utility Displays
DME64N/DME24N Owner’s Manual
54
Cascade Setup (CASCAD) Page
Shows the status of the [CASCADE] connectors. Refer to
“CASCADE Connection” on page 30 for connection
details.
Settings are made from the DME Designer application
running on the connected computer.
1 Head Margin
Shows the status of the head margin of the audio signal
handled via the [CASCADE] connectors.
0dB: The head margin is 0 dB.
-18dB: The head margin is -18 dB.
2 Unit No
Shows how many devices the unit is from the beginning of
the cascade chain.
3 Mixer I/O
Shows the status of the channels to be used for audio
signals cascaded to a mixer.
■: Channel audio will be transmitted to and received
from mixer.
: Channel audio will be transferred between DME64N/
24N units.
Check Page
Even in an environment with no computer, you can check
the connections without using DME Designer by directly
connecting the DME64N/24N input/output.
The meter does not operate during a connection check.
MODE: OFF
Makes connections in the configuration used in the current
scene.
This is set to OFF when the unit is started.
MODE: Thru
Directly connects the Input and Output of each slot one-
to-one for
each channel.
When input-only or output-only cards like AD or DA
cards are
inserted in the slots, you cannot perform checks in this
mode.
In the DME24N, the internal AD and internal DA are
directly
connected on each channel.
MODE: Summing
Sums all input signals coming from Inputs (-12dB),
without regard to
device or card type, and outputs it through all Outputs.
NOTE
This page only appears on the DME64N.
NOTE
The Head Margin setting only applies when connected to a
mixer. When not connected to a mixer the head margin is
automatically set to 0 dB.
NOTE
Make sure that the Mixer I/O setting is the same for all cascaded
DME64N/24N units.
1
2
3
PM5D
DME64N DME64N
IN OUT
OUT
DME64N
ININ OUT
Unit No = 01 Unit No = 02 Unit No = 03
NOTE
This page will not appear on the ICP1 display.