User Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
142
Remote Connection
Connect the digital mixer to the [REMOTE] connector of one of the DME units, and set the port to be
used for head amp control to “Remote” via the [Internal HA Control] parameter in the “Remote” tab in
the “Utility” dialog box (page 172). Use an Ethernet cable connected to the [NETWORK] connectors to
make connections between DME series units.
NOTE
• Only control signals are transmitted and received via the REMOTE connection. Audio connections must be made
separately.
• Connection can also be made to the [REMOTE] connector of a DME unit with built-in head amplifiers.
REMOTE REMOTE
DME8i-C
DME4io-C
DME8i-ES
DME4io-ES
DME24N
Ethernet
Digital Mixer
D-SUB 9-pin Cable
Network
Switch