User Manual

Chapter 4 Designer
DME Designer Owner’s Manual
194
Too lb ar
Frequently used commands are arranged here as buttons.
 [Print] Button (page 203)
Prints the active design window.
 [Undo] Button (page 204)
Undoes the most recent edit operation.
 [Redo] Button (page 204)
Restores operations undone with the [Undo] button back to their original condition.
 [Cut] Button (page 204)
Cuts the selected object from the screen and moves it to the clipboard.
 [Copy] Button (page 204)
Copies the selected object to the clipboard.
 [Paste] Button (page 204)
Pastes data from the clipboard.
 [Navigator] Button (page 197)
Displays or hides the Navigator window.
 [Resource Meter] Button (page 196)
Displays or hides the Resource Meter window.
 [Analyze] Button (page 208)
Displays the “Analyze” dialog box, and analyzes the configuration.
 [Show Signal Delay] Button
The digital signal delay value is displayed in the Configuration window.
 “Show Signal Delay (Delay Display Value)” in “Configuration Window” (page 305)
 [Probe Monitor] Button
Turns the probe monitor ON or OFF.
 “Probe Monitor” in “Configuration Window” (page 303)
[Print] Button
[Undo] Button
[Redo] Button
[Cut] Button
[Copy] Button
[Paste] Button [Show Signal Delay] Button
[Navigator] Button
[Resource Meter] Button
[Analyze] Button
[Zoom In] Button
[Probe Monitor] Button [Arrow] Button [Show Unconnected Node] Button
[Zoom Out] Button [Hand] Button [Edit Mode] Button
[Actual Size] Button
[Zoom To] Button