User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
400
Delay Short
Delay short components are available with from one to eight outputs. Each has a single input and from
one to eight outputs.
Double-click a component to display the component editor for it. Only the number of outputs in each
component is different. The other parts are the same.
8
Delay Scale ms
Sample
Meter
Feet
Frame
Beat
Selects the units for setting the delay time.
The selected button will light up, and the
units in the [Delay] edit box will change.
If [Beat] is selected, use the knob to set the
BPM (beats/minute).
NOTE
Delay Scale does not support the parameter link feature. Refer to “Parameter Link” on page 94 for information on parameter
linking.
Section Parameter Setting Range Function
1
Delay All Bypass ON/OFF Bypasses from input to output.
2
Input Level -∞ to ±0 dB Sets the input signal level.
3
Mute ON/OFF Mute the input signal.
Section Parameter Setting Range Function
1
8
2
3
6
5
4
7
Delay-Short component editor