User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
405
De-Esser
Compresses the signal above a specified frequency. The de-esser controls sibilant (hissing) sounds
included in speech that are produced by the letter “S.” Both mono channel and stereo channel de-
essers are provided.
Mono channel de-essers have one input and one output each. Stereo channel de-essers have two
inputs and two outputs each.
Parameter Setting Range Function
4
Threshold -54 dB to ±0 dB Sets the threshold value.
5
Ratio 1:1 to ∞:1 Sets the compression ratio.
6
Knee HARD, 1, 2, 3, 4, 5 Sets the way compression is applied.
7
Attack 0 to 120 ms Sets the attack time.
8
Release 44.1 kHz: 6 ms to 46 s
48 kHz: 5ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
Sets the release time.
The setting range may very, depending on the
operating frequency.
9
Gain ±0 dB to +18 dB Sets the output gain.
)
KeyIn Mono SELF
KEYIN
Selects the trigger source from a menu. The
currently selected trigger source is displayed on the
button.
Stereo L
R
LR BOTH
KEYIN
!
On ON/OFF Turns the compressor ON.
–70
–60
–50
–40
–30
–20
–10
0
+10
+20
–70 –60 –50 –40 –30 –20 –10 0 +10 +20
Input Level (dB)
Output Level (dB)
Ratio=2:1
Knee=Hard
Threshold=–20dB