User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
407
Ducking
Attenuates the output a particular amount, when an input signal exceeds its threshold. Both mono
channel and stereo channel duckers are provided.
Mono channel duckers have one input, one output, and one KeyIn input. Stereo channel duckers have
two inputs, two outputs, and one KeyIn input.
Double-click a component to open the component editor for it. The parameters are the same for mono
channel and stereo channel components.
Name Function
1
Ducking Curve Displays results graphically. The horizontal axis is
the input signal level, and the vertical axis is the
output level.
2
Gain Reduction Meter Displays the gain reduction attenuation.
3
Output Meter Displays the output signal level.
Parameter Setting Range Function
4
Threshold -54 dB to ±0 dB Sets the threshold value.
5
Range -70 dB to ±0 dB Sets the amount by which the level is reduced.
6
Attack 0 to 120 ms Sets the attack time.
7
Hold 44.1 kHz: 0.02 ms to 2.13 s
48 kHz: 0.02 ms to 1.96 s
88.2 kHz: 0.01 ms to 1.06 s
96 kHz: 0.01 ms to 981 ms
Sets the hold time.
The setting range may very, depending on the
operating frequency.
8
Decay 44.1 kHz: 6 ms to 46 s
48 kHz: 5 ms to 42.3 s
88.2 kHz: 3 ms to 23 s
96 kHz: 3 ms to 21.1 s
Sets the decay time.
The setting range may very, depending on the
operating frequency.
9
KeyIn Mono SELF
KEYIN
Selects the trigger source from a menu.
The currently selected trigger source is displayed
on the button.
Stereo L
R
LR BOTH
KEYIN
)
On ON/OFF Turns the ducking ON.
1
2 9
)
3
4 5 6
7 8
Ducking component editor