User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
416
Parametric Equalizer (PEQ)
Boosts or cuts signals within specified frequencies. In both the Mono group and Stereo group there
are 2 band, 3 band, 4 band, 6 band, and 8 band components available.
Mono channel PEQs have one input and one output each. Stereo channel PEQs have two inputs and
two outputs each. The number of bands varies depending on the component, but all share a common
configuration in the component editor.
Double-click a component to display the component editor for it. The number of bands varies
depending on the component, but all share a common configuration in the component editor.
Name Function
1
EQ Curve Displays the equalizer effect.
You can change the parameter by dragging
the control point with the mouse.
Section Parameter Setting Range Function
2
Input Level -∞ to +10 dB Sets the input signal level.
3
Phase ON/OFF Reverses the phase of the input signal.
4
Equalizer Type PEQ
L.SHELF 6 dB/Oct
L.SHELF 12 dB/Oct
H.SHELF 6 dB/Oct
H.SHELF 12 dB/Oct
HPF
LPF
Select the filter type from the menu.
5
Q 0.1 to 16.0 Sets the band width for each frequency
band.
6
Frequency 20 Hz to 20 kHz Sets the frequency for each band.
7
Gain -18 dB to +18 dB Sets the level of the frequency that will be
changed.
8
Bypass ON/OFF Turns ON bypass for each band.
1
8
5
6
7
3
2
)
9
4
!
PEQ component editor