User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
432
*1 The amount of gain compensation varies according to the number of input channels with open gates as follows:
5
Decay 44.1 kHz: 110 ms to 46 s
48 kHz: 101 ms to 42.3 s
88.2 kHz: 55 ms to 23 s
96 kHz: 51 ms to 21.1 s
Sets the speed for closing the gate.
The setting range may vary, depending
on the operating frequency.
6
Solo ON/OFF Turns solo ON. If Solo is engaged for
even one channel, all non-Solo channels
will be muted.
7
On ON/OFF Turns ON each channel’s input.
8
Fader -∞ to +10 dB Sets the input signal level for each
channel.
9
Master Output Gain Correct ON/OFF Automatically adjusts the master output
level to maintain a constant level
according to the number of input
channels with open gates. (*1)
)
On ON/OFF Turns ON each channel’s output.
!
Master -∞ to +10 dB Sets the output signal level.
Number of channels
with open gates
Amount of gain
compensation
0 0.0 dB
1 0.0 dB
2 -3.0 dB
3 -4.8 dB
4 -6.0 dB
5 -7.0 dB
6 -7.8 dB
7 -8.5 dB
8 -9.0 dB
9 -9.5 dB
10 -10.0 dB
11 -10.4 dB
12 -10.8 dB
13 -11.1 dB
14 -11.5 dB
15 -11.8 dB
16 -12.0 dB
Section Parameter Setting Range Function