User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
446
 All Inputs to One Output
When you click the output channel number on the matrix, the [Matrix Mixer - All Inputs to One
Output] editor window opens. One output channel and the send levels from each input channel to
the output bus are displayed. The output channel is the one you have clicked on in the matrix mixer
component editor.
Section Parameter Setting Range Function
1
Output Meter -- Displays the output signal level for each channel.
2
Level -∞ to +10 dB Sets the output signal level for each channel.
3
On ON/OFF Turns ON each channel’s output.
4
Block On -- Turns ON output for all channels in the Output
Master window. When turned ON, the [On] button
lights up.
5
Off -- Turns OFF output for all channels in the Output
Master window.
6
Nominal -- Resets all output signal levels in the Output Master
window, making them 0 dB.
7
Minimum -- Resets all output signal levels in the Output Master
window, making them -∞ dB.
Section Parameter Setting Range Function
1
Bus Send Level Level -∞ to +10 dB Sets the send level from each input channel to the
output bus.
2
On ON/OFF Turns ON the send from each input channel.
3
Output Channel -- Displays the selected output channel. Select
another channel from a menu.
4
On ON/OFF Turns ON the output for the channel displayed in the
window.
5
Meter -- Displays the output signal level of the channel
displayed in the window.
6
Block On -- Turns ON send from all input channels. When
turned ON, the [On] button lights up.
7
Off -- Turns OFF send from all input channels.
8
Nominal -- Resets all send levels, making them 0 dB.
9
Minimum -- Reset all send levels, making them -∞ dB.
1
2
3
45
6
7
9
8