User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
454
LR
Separates a single input into left and right outputs. Components are available with 1, 2, 4, 8, 12, and
16 channels.
Double-click a component to display the component editor for it. The number of channels varies
depending on the component, but all share a common configuration in the component editor.
Parameter Setting Range Function
1
CSR 0 to 100% Sets the signal level sent to the center channel, in
relation to the signal level sent to the L and R
channels.
2
Pan L63 - Center - R63 Sets LR orientation.
3
Pan Nominal Position Center
LR
Selects the nominal position from a menu.
Parameter Setting Range Function
1
Pan L63 - R63 Sets the LR orientation.
2
Pan Nominal Position Center
LR
Selects the nominal position from a menu.
1
3
2
LCR component editor
2
1
Pan component editor