User Manual

Appendix

DME Designer Owner’s Manual

513

2. Rotate the dial to edit the value as required.

3. Repeat step 1 to select the next value to be

edited, use the dial to edit as required, and

repeat until all values have been edited as

required.

4. When all values have been edited, press the

[ENTER] key. A confirmation window will

appear: press [ENTER] one more time to

confirm the edits and close the window.

List Parameters

List parameters allow you to make one selection from

a list of possibilities.

Rotate the dial to scroll up or down the list. In some

cases the centermost item on the display will be

always highlighted as the list is scrolled, and in others

the same item will remain highlight as the list is

scrolled up or down.

1. Use the dial to scroll up or down the list.

As you scroll the highlighted selection will remain

highlighted, and will scroll up or down with the list.

2. Press the [ENTER] key to highlight the

centermost item on the display.

3. Press the [ENTER] key to select the

highlighted item and close the window.

NOTE

You can return to the Parameter Edit display without changing

any values by pressing the [CANCEL] key rather than the

[ENTER] key.

ENTERENTER

List Parameter with Scrolling Highlight

NOTE

In some cases a confirmation dialog will appear when the

[ENTER] key is pressed. If this occurs press the [ENTER] key a

second time to continue.