User Manual

Appendix
DME Designer Owner’s Manual
515
Scene Recall
This procedure recalls a new scene (refer to
page 512).
1. Press the [SCENE] button.
The Scene Recall display will appear.
2. Select a new scene.
Scenes are selected as described in the “List
Parameters” section on page 513.
3. Press the [ENTER] button.
A confirmation message will appear.
4. Press the [ENTER] button again.
The new scene will be selected.
Scene Store
Stores the current scene data for later recall.
1. Press the [SCENE] button for longer than
2 seconds.
A confirmation window will appear on the display.
2. Press the [ENTER] key.
This stores the scene data in the current scene
memory.
NOTE
If head amplifier parameters are included in the recalled scene
data, the head amplifier settings will be changed accordingly.
NOTE
Press the [CANCEL] key if you want to abort the scene store
operation.