User Manual

Appendix
DME Designer Owner’s Manual
516
Utility Displays
Most basic ICP1 functions can be accessed via the Utility Display.
Items accessible via the Utility display
Page Item Description Manual Page
Info Current status and settings for the devices basic parameters. page 517
Label Name display.
Version The device’s current version number.
Net Current status and settings for the Ethernet network. page 517
Master/Slave Displays current status whether the device is device group master or not.
IP Adr. Current status and setup for the device’s IP address.
Master ID Displays and sets the device group master host address.
Link Mode Current status and setup for the [NETWORK] connector.
MAC Adr. Displays the device’s MAC address.
Disp Current status and setup for the display mode, etc. page 518
LCD Contrast Current status and setup for display panel contrast.
LCD Backlight Current status and setup for the display panel backlight.
Lock Current status and setup for panel lock and related functions. page 518
Utility Current status and setup for the Utility display settings.
Panel Lock Boot Current status and setup for the ICP1's power-on panel lock status.
Panel Lock Target Current status and setup for the panel lock target.
User Defined Lock Panel lock and setup for each page of user-defined parameters.
Misc Current status and setup for settings not included in other pages. page 519
Scene Store Current status and setup for scene store accessibility.
Last Mem. Resume Indicates whether the previous memory contents will be retained when the
unit is restarted.
Event Scheduler Current status whether an event schedule setup in the DME Designer will be
executed or not.