User Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
76
 DME List
•[Date]
Displays the date the event occurred. (Example Display: 2004-08-24)
•[Time]
Displays the time the event occurred.
• [Type]
Displays the event type and icon.
There are three event types:
(Warning): Warning event
(Error): Error event
(Information): Other events
•[Zone]
Displays the name of the zone in which the event occurred.
• [Group]
Displays the name of the device group in which an event has occurred.
•[DME]
Displays the name of the DME in which the event occurred.
•[Event]
Displays the content of the event.
[Log Setup] Button
Displays the “Log Setup” dialog box (page 77). Here you can make Event Log settings.
[Get Log] Button
When offline, this opens the “Get Log” dialog box (page 78). The event log data can be taken from
the DME units, and written to a file on the computer.
[Zone]
Selects the zone, device group and device for which events will be displayed. Only events from the
selected device will be displayed in the window. If [All] is selected, events will be displayed for all.
Display button (Information/Warning/Error)
• [Display Information] Button
Switches between displaying and hiding Information events.
When turned ON, Information events are displayed in the “Event Logger” window.
• [Display Warning] Button
Switches between displaying and hiding Warning events.
When turned ON, Warning events are displayed in the “Event Logger” window.
• [Display Error] Button
Switches between displaying and hiding Error events.
When turned ON, Error events are displayed in the “Event Logger” window.
[Clear Screen] Button
Clears the event log from the “Event Logger” window. The DME unit event log is not cleared.