User Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
86
 [Clear] Button
Deletes the contents of the scene selected on the list. The button will be grayed out and cannot be
used when the DME unit is online or when an SP2060 preset is being used.
If the preset parameters included in a scene are not used in another scene, a “Delete preset?”
message will be displayed.
If the preset parameters are not needed, click the [OK] button. If you click the [Cancel] button, the
preset parameters will not be deleted. Whichever you click, the scene itself will be deleted.
 [Recall Settings] Button
This button opens the “Recall Settings” dialog box.
Recall Safe and Partial Recall
Recall Safe and Partial Recall parameters can be set up so that only specified components are
recalled, or specified components are omitted, with a scene is recalled. Recall Safe specifies the
components that will be omitted (i.e. not recalled) when a scene is recalled. Recall safe settings
can be made independently for each configuration, and apply to all scenes that use the same
configuration.
Conversely, Partial Recall specifies the components that will be recalled when a scene is recalled.
Partial Recall “sets” can be saved for use with single or multiple scenes.
The Recall Safe and Partial Recall settings are accessed via the [Recall Safe] and [Partial Recall]
buttons, respectively.
[Recall Safe] Tab
The components that will not be recalled when a scene is recalled are selected via this tab.
NOTE
The [Cancel] button on the “Delete Preset?” message does not cancel the [Clear] for the scene. It merely cancels
deletion of the presets.
Component
Component Tree