User Manual

DME Setup Manual 2
 Install DME Designer and DME-N Network Driver (page 5)
 USB-MIDI Driver Installation (page 5)
 Connecting to External Controllers
This section covers connection to remote controllers via Ethernet or GPI.
 Setting up DME64N/24N Networks via Panel Operations
Describes how DME64N/24N network settings can be made via the control panel.
 Related web site on DME series and peripherals
This section serves as a guide to online information on Speaker Processor Components library data,
Mini-YGDAI cards, and touch-panel controllers (AMX/Creston).
Setup Flow
Software Installation (page 3)
Basic Setup (page 7) Advanced Setup (page 13)
 Connecting a single DME unit
directly to a computer via USB
cable
• Make all necessary Mini-YGDAI card
settings using DME Designer (when one or
more Mini-YGDAI cards are used).
• Place and connect the components.
• Going Online and Checking sound output
 Connecting multiple DME units to a
computer via Ethernet cables
• M ake the required DME unit network settings.
• Make the required computer network
settings.
• Setting the DME-N Network Driver
• Take the connection online and check the
sound output as described in the Basic Setup
section.
In-depth Information on DME Units (page 20)
DME-N Network Driver Setup Details (page 23)
Troubleshooting & Tips (page 26)