User Manual

DME-N Network Driver Setup Details

DME Setup Manual 24

[Device Port No.]

The MIDI port number of the device selected in the

Target Device List can be set via this menu. The

MIDI port number also functions as device ID

number. It can be set to “1” or “2” for DME64N/24N

units. It should be set to “1” for DME Satellite units.

n The MIDI port number must be set properly or

communication with the device will not be possible.

[Apply] Button

Click the [Apply] button after editing the Device

Name, Device IP Address, Device MAC Address,

or Device Port No. parameters to actually apply the

changes. Also, devices added to the Target Devic

List (1) by pressing the [New] or [Duplicate]

buttons will only actually be registered for

communication with the DME-N Network Driver

when the [Apply] button is pressed.

[Advanced Settings] Button

Opens the “Advanced Settings” window. This

window provides access to advanced settings. For

details refer to the “Advanced Settings” dialog box

in the next section.