User Manual

DME Setup Manual 3
Begin by downloading the DME Designer Combo Installer and the USB-MIDI Driver from the “Downloads”
page on the Yamaha Pro Audio website
(http://www.yamahaproaudio.com/downloads/firm_soft/index.html).
Select and download the appropriate driver for your computer’s operating system.
n DME Designer V4.0 supports Windows7, Windows Vista, and Windows XP.

Minimum System Requirements
Windows Vista / Windows 7
Windows XP
n The system requirements described above are applied to the DME Designer version 4.0.0. Keep in mind that the software is
often updated and the system requirements are subject to change. You can check the latest version information and its system
requirements at the following website.
http://www.yamahaproaudio.com/
The system requirements may differ slightly depending on the particular computer.
n Disable any power-saving mode on the computer.
n When using the Windows Vista operating system, use only USB-MIDI Driver V3.0 or later, and DME-N Network Driver V1.2 or
later.
When using the Windows 7 operating system, use only USB-MIDI Driver V3.0.4 or later, and DME-N Network Driver V1.2.1 or
later.
Software Installation
OS Windows 7: Ultimate / Professional / Home Premium
Windows Vista: Ultimate / Business / Enterprise
Windows XP: Professional / Home Edition
Hard Disk 300MB or more
Display 1280 x 1024 pixels or higher; High Color (16-bit) or higher
Other Pointing device such as a mouse
Ethernet (100Base-TX/10Base-T) port or USB port
CPU 32bit: 1.4GHz or higher Intel Core/Pentium/Celeron family processor
64bit: Intel 64 compatible processor
Available Memory 1GB or more (2GB or more on Windows 7 64-bit)
CPU 1GHz or higher Intel Core/Pentium/Celeron family processor
Available Memory 256MB or more