User Manual

16/34
Mode 4: Audio from DME64N to PM5D
This uses the CASCADE IN port of PM5D, but is not a Cascade function. (MIX buses are not merged: you use the PATCH function to choose the required audio connections.)
NOTE:
It is not possible to use the Cascade function for combining DME cascade output with the MIX buses of PM5D.
Advantages:
Use DME for extra input channels, like a sub-mixer.
Patch DME cascade outputs to any input of PM5D.
Still all 4 slots can be used for outputs, such as multi-track recording.
Get 32 channels from DME to PM5D even at 96 kHz (The CASCADE IN/OUT ports can work in ‘DOUBLE SPEED’ mode.)
Disadvantages:
Inputs from up to 2 slots are lost (32 inputs).
DME Control function is not possible.
DME audio cannot be monitored from PM5D.
32 outputs from DME64N to PM5D’s buses (even at 96kHz)
CASCADE IN CASCADE OUT
64 I/O from MY-slots (44.1/48 kHz)
DME64N word clock: INTERNAL
PM5D word clock: CASCADE IN
32 inputs/64 outputs from MY-slots
(44.1/48 kHz)
PM5D & DME64N CASCADE / Mode 4: Audio from DME64N to PM5D