User Manual

11
Muting or Unmuting
1. Press the [Fn] key to display the [Device Mute]
screen.
2. Rotate the main knob to select [Yes] and then press it
to apply the selection.
The mute ON/OFF status can be confirmed based on the
icons at the top of the [Home] screen.
To unmute the device, press the [Fn] key again.
Restoring (reinitializing) factory
default settings
There are two ways to initialize the product.
By selecting [Settings] and then
[Initialize Settings]
Do not switch OFF the power supply during initialization.
1. On the [Menu] screen, rotate the main knob to select
[Setting]. Then press the knob to apply the setting.
The [Unit ID] screen is displayed.
2. Rotate the main knob to select [Initialize Settings].
Then press the knob to apply the selection.
The screen for selecting the setting to initialize is
displayed.
3. Rotate the main knob to select the setting to initialize
and then set only the setting that requires
initialization to On.
In addition to signal processing settings, the following
settings are also initialized if set to On.
4. When finished selecting the settings, rotate the main
knob to select [Initialize] and then press the knob.
An initialization confirmation screen is displayed.
5. Rotate the main knob to select [Yes] and then press it
to apply the selection.
The system automatically restarts when initialization is
finished.
How to initialize settings if you forgot
the PIN code
If the PIN code specified for locking the panel or the
administrator PIN is forgotten, for example, and [Initialize]
can not be selected on the [Settings] screen, then the
following method can be used to force initialization.
1. While simultaneously holding down the [Fn], [MENU/
HOME], and [ ] (back) keys, switch the power
OFF.
2. Keep holding down the three keys until the Yamaha
logo and the initialization screen are displayed on the
screen.
The system automatically restarts when initialization is
finished.
Pressing the [Fn] key two times in a row displays the control function
ON/OFF screen. Then specify the settings in the same manner.
NOTE
IP Settings
Unit ID/ Device Name
Dante Settings
Stored Files
This regular initialization process does not initialize administrator PIN
values or license activation information.
This forced initialization process leaves license activation
information, but restores all other settings to factory default settings.
NOTE
NOTE