Specifications

10. Testing & troubleshooting
CobraNet™ Manager
CobraNet™Discovery
D-View5.1
Checklist
After assembling a networked audio system it is good
practicetoconductasystematicseriesofcheckstomake
sure everything is OK. These checks should include
network functionality, audio functionality and sabotage
behavior.
Check 1: Double check network settings
Connect a PC to the default VLAN and conrm that
all switches are on-line, for example Dlink’s D-View
monitoring software. Double check the VLAN settings
andSTPsettingsineveryindividualswitchbybrowsing
themonebyone.
Check 2: Check the CobraNet™ network
Connect a PC to the CobraNet™ VLAN and launch
CobraNet™Manager.ConrmthatallCobraNet™devices
areshownintheoverview.
Check 3: Double check audio settings
Using the appropriate software, double check the audio
settings in all individual CobraNet™ devices: bundle
numbers, wordclock settings, sample size and latency
mode. Conrm that the conductor is assigned to the
appropriatedevice.
Check 4: Listen
Connect some small speakers to the most important
systemoutputsandthenconnectanaudiosourcetoevery
inputone-by-oneandcheckifaconnectiontotheoutputs
isavailablewithgoodsoundquality.
Check 5: Disco
Connect a PC to the CobraNet™ network and launch
Discoverytoconrmthatallaudioconnectionsarereally
error-free.Checkforerrorsatallbundles.
Check 6: Sabotage
Sabotage all network components in the system one by
one: remove cables or power down switches, conrm
system recovery, re-connect or power-up, conrm that
the system switches back to a redundant state. Notethe
recovery timing at each stage to include in the project
documentation.
Troubleshooting
If an emergency occurs in a system the most important
thing to do is to wait until the recovery is completed.
Interfering with the system before recovery takes place
mightdisabletherecovery!Afterthesystemhasrecovered
steps1,2and5ofthechecklistcanbeperformedtoassess
thesituation.Iftheproblemcanbelocatedwaitforabreak
intheperformancetosolveitastheaudiowillprobably
beaffectedwhenthesystemswitchesbacktoaredundant
state.