User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
369
Delay Short
Delay short components are available with from one to eight outputs. Each has a single input and from
one to eight outputs.
Double-click a component to display the component editor for it. Only the number of outputs in each
component is different. The other parts are the same.
NOTE
Delay Scale does not support the parameter link feature. Refer to “Parameter Link” on page 81 for information on parameter
linking.
Section Parameter Setting Range Function
1 Delay All Bypass ON/OFF Bypasses from input to output.
2 Input Level -∞ to ±0 dB Sets the input signal level.
3 Mute ON/OFF Mute the input signal.
4 Delay Tap Delay ms: 0 to 130
Sample: the range depends
on the Fs value.
Meter: 0 to 44.7
Feet: 0 to 146.5
Frame: the range depends on
the Frame value.
Beat: the range depends on
the Beat value.
Sets the delay time.
There are two edit boxes, displaying
milliseconds and the units selected for [Delay
Scale].
5 Level -∞ to ±0 dB Sets the output signal level for each channel.
6 On ON/OFF Turns ON each channel’s delay.
7 Mute ON/OFF Turns ON muting for each channel’s output.
8 Delay Scale ms
Sample
Meter
Feet
Frame
Beat
Selects the units for setting the delay time.
The selected button will light up, and the
units in the [Delay] edit box will change.
If [Beat] is selected, use the knob to set the
BPM (beats/minute).
1
8
2
3
6
5
4
7
Delay-Short component editor