User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
406
■ One Input to All Outputs
When you click the input channel number on the left side of matrix, the [Delay Matrix - One Input to
All Outputs] editor window opens. One input channel and all output channels are displayed. The
input channel is the one you have clicked on in the delay mixer component editor.
Input Channel Switching
The [Delay Matrix - One Input to All Outputs] editor window displays the input channel for the
channel number clicked on in the delay matrix component editor.
The [Channel] buttons in the [Input] section of the [Delay Matrix - All Inputs to One Output] editor
window switch the channel group that is displayed in the window.
Section Parameter Setting Range Function
1 Input Channel -- Displays the selected input channel. Select another
channel from a menu.
2 Phase ON/OFF Reverses the phase of the input signal.
3 Level -∞ to +10 dB Sets the input signal level.
4 Solo ON/OFF Turns solo ON. If Solo is engaged for even one
channel, all non-Solo channels will be muted.
5 On ON/OFF Turns input ON.
6 Bus Send Level Delay 0 to 500 ms Sets the delay time for each output channel.
7 Level -∞ to +10 dB Sets the signal level for each output channel.
8 On ON/OFF Turns ON the output for each output channel.
9 Block On -- Turns ON all channel outputs. When turned ON, the
[On] button lights up.
) Off -- Turns OFF all channel outputs.
! Nominal -- Resets all output signal levels, making them 0 dB.
@ Minimum -- Resets all output signal levels, making them -∞ dB.
9
)
!
1
2
4
5
3
6
7
8
@