User Manual

Chapter 2 DME Designer Overview

DME Designer Owner’s Manual

5 Making MIDI Port Settings in DME Designer.

The port for each device group master can be selected via the “Port” dialog box. If the driver is set

up already, check the settings before going online.

“Port” dialog box (page 135)

6 Storing and Checking Scenes.

When moving online, the lowest scene must be stored. You can check if a scene is stored using the

“Scene Manager” dialog box.

See “IP Address Setup” on page 145.

7 Recalling Scenes.

When going online, the scene will be recalled. Its scene number must be displayed in [Scene

Number], and its scene name will be displayed in Scene Name. If [--------] is displayed of [Scene

Name], the scene will be recalled.

Main Panel Window → “Current Scene” (page 48)

See “Scene Manager” on page 70.

NOTE

A maximum of 32 ports can be set.

NOTE

Slave DME64N/DME24N units connected via Ethernet and ICP1 units cannot be set.

NOTE

Only USB 1 is available on DME8i-C/DME8o-C/DME4io-C.

NOTE

Since the SP2060 has scene preset data this conﬁrmation is not necessary.

NOTE

Since the SP2060 has scene preset data this conﬁrmation is not necessary.

NOTE

When the scene device group display mode is “ALL” the scene link name will be displayed. Select a DME group to display

the DME group scene name.

MIDI Setup button