User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
418
LR
Separates a single input into left and right outputs. Components are available with 1, 2, 4, 8, 12, and
16 channels.
Double-click a component to display the component editor for it. The number of channels varies
depending on the component, but all share a common configuration in the component editor.
Parameter Setting Range Function
1 CSR 0 to 100% Sets the ratio for sending the center signal to LR.
2 Pan L63 - Center - R63 Sets LR orientation.
3 Pan Nominal Position Center
LR
Selects the nominal position from a menu.
Parameter Setting Range Function
1 Pan L63 - R63 Sets the LR orientation.
2 Pan Nominal Position Center
LR
Selects the nominal position from a menu.
1
3
2
LCR component editor
2
1
Pan component editor