User Manual
Chapter 6 Component Guide
DME Designer Owner’s Manual
422
■ Surround 5.1
Surround 5.1 has surround pan with three channels in front, two in the rear, and one sub woofer
channel. There is one input and six outputs.
Double-click a component to display the component editor for it.
Section Name/Parameter Setting Range Function
1 2D Surround
Pan Graph
2D Surround
Pan Graph
-- Sets the sound image orientation. You can
move the sound image by clicking and
dragging.
2 Speaker Button -- Clicking here moves the sound image to the
button location.
3 Position Left-Right Position L63 - C - R63 Displays the LR surround location.
4 Front-Back Position F63 - C - R63 Displays the front-back surround location.
5 Divergence Front 0 to 100% Sets the ratio for sending the front-center
signal to front L and front R.
6 LFE Level -∞ to +10 dB Sets output level to the sub woofer.
7 Pan Nominal Position Center
LR
Selects the nominal position from a menu.
1
3 4
5
6
7
2
2
Surround 5.1 component editor