User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
450
Analog Input and Output
In the DME24N/DME8i-C/DME8o-C/DME4io-C configuration window, there are [Analog Input] and
[Analog Output] blocks.
■ Analog Input
Double-click [Analog Input] to display the component editor for it.
Right-click the component and select [Open Input Component
Editor] from the contextual menu to open the component editor.
■ Analog Output
Double-click [Analog Output] to display the component editor for it. The displayed parameters are
the same as for Slot Out component editor.
NOTE
The DME24N, DME8i-C and DME4io-C have analog inputs. The DME24N and DME8i-C have eight analog inputs, while the
DME4io-C has four.
Parameter Setting Range Function
1 +48 ON/OFF Turns ON phantom power (+48V).
2 Gain +10 to -60 dB Sets the head amp gain.
1
2
Internal Head Amp component editor