User Manual

Chapter 6 Component Guide
DME Designer Owner’s Manual
455
■ MY-Others
Double-click the block to display the component editor for it.This editor can be used for generic MY
card editing, but some parameters are not available. Use a card specific editor when available.
■ MY8-AE96S
Double-click the block to display the component editor for it.
Parameter Setting Range Function
1 Input Format Double Channel
Double Speed
Single
Selects the format for 88.2/96 kHz.
2 Double Fs ON/OFF When ON the speed of the word clock from the MY
Card is doubled. Only displayed when this card is
functioning as the word clock master.
3 Output Format Double Channel
Double Speed
Single
Selects the format for 88.2/96 kHz.
Parameter Setting Range Function
1 Input Format Double Channel
Double Speed
Selects the format for 88.2/96 kHz.
2 Double Fs ON/OFF When ON the speed of the word clock from the MY
Card is doubled. Only displayed when this card is
functioning as the word clock master.
3 Output Format Double Channel
Double Speed
Selects the format for 88.2/96 kHz.
4 Sampling Rate
Converter
ON/OFF Turns the sampling rate converter ON.
1
3
2
1
3
4
2
MY8-AE96S component editor