User Manual

Chapter 3 Main Panel Window
DME Designer Owner’s Manual
66
■ DME List
• [Date]
Displays the date the event occurred. (Example Display: 2004-08-24)
• [Time]
Displays the time the event occurred.
•[Type]
Displays the event type and icon.
There are three event types:
(Warning): Warning event
(Error): Error event
(Information): Other events
• [Zone]
Displays the name of the zone in which the event occurred.
• [Group]
Displays the name of the device group in which an event has occurred.
• [DME]
Displays the name of the DME in which the event occurred.
• [Event]
Displays the content of the event.
[Log Setup] Button
Displays the “Log Setup” dialog box. Here you can make Event Log settings.
[Get Log] Button
When you are offline, this selects the DME from which the log will be taken. During online status,
this button is grayed out and cannot be used.
Clicking here displays the “Get Log” dialog box.
[Zone]
Selects the zone, device group and device for which events will be displayed. Only events from the
selected device will be displayed in the window. If [All] is selected, events will be displayed for all.
Display button (Information/Warning/Error)
• [Display Information] Button
Switches between displaying and hiding Information events.
When turned ON, Information events are displayed in the “Event Logger” window.
• [Display Warning] Button
Switches between displaying and hiding Warning events.
When turned ON, Warning events are displayed in the “Event Logger” window.
• [Display Error] Button
Switches between displaying and hiding Error events.
When turned ON, Error events are displayed in the “Event Logger” window.
[Clear Screen] Button
Clears (erases) events.