User Manual

Chapter 3 Main Panel Window

DME Designer Owner’s Manual

■ [Store] Button

Stores the contents of the current conﬁguration into the scene selected in the list. If an empty scene

is selected and the contents stored there, a new scene is created. If a scene is already stored in

the selected scene number, it will be overwritten. If [Conﬁrm Scene Store] is checked on the

[Application] tab of the “Preferences” dialog box, a conﬁrmation dialog box will be displayed

before the scene is stored.

When a scene is stored, the conﬁguration parameters at that time are saved as “preset

parameters.”Preset parameters are created automatically.

■ [Recall] Button

Recalls the scene selected in the list and makes it the current scene.

■ [Scene Link] Button

Opens “Scene Link Manager” dialog box.

Refer to “Scene Link Manager” on page 130

NOTE

The currently logged on user can store scenes at a security level equal to or lower than his or her own only.

NOTE

When the computer and DME64N/24N unit are online, a scene stored in the DME Designer will also be stored on the

DME or SP2060 unit, regardless of the DME or SP2060 settings.

The DME64N/24N utility display Misc. page [Scene Store] setting only affects store operation from the DME panel

controls.

NOTE

The currently logged on user can recall scenes at a security level equal to or lower than his or her own only.