User Manual

Chapter 3 Main Panel Window

DME Designer Owner’s Manual

■ Preset parameters List

Displays the preset parameters for each DME or SP2060 unit in the scene selected in the list. When

another scene is selected on the list, the contents of the preset parameters list will be changed.

You can change the preset parameters used in the scene by clicking the radio buttons to the left of

the preset parameters names. You can also create, delete, and store preset parameters or change

their names.

DME

Displays the DME and SP2060. Below the DME and SP2060 are [Slot], [Component], and [AD]. If

there are preset parameters below them, a [+] button will be displayed. When you click the [+] it

becomes a [-] and the presets are displayed.

Preset parameters

Displays DME and SP2060 preset parameters.

If you click the preset parameters name, selecting the text that is there, you can change the preset

parameters name. When preset parameters are automatically created when a scene is stored, they

are named “Preset001,” “Preset002,” and so on. preset parameters created with the [New] button

are named “New Preset.”

You can select the preset parameters used in a scene by clicking the radio buttons to the left of the

preset parameters names.

■ [Del] Button

Deletes the preset parameters selected on the preset parameters list.

■ [Store] Button

Stores the current parameter status in the preset parameters selected in the preset list. The

contents of the selected preset parameters will be overwritten.

■ [New] Button

Stores the current status and creates a new preset parameters. The newly created preset

parameters is named “New Preset.”

■ [Del Unused] Button

Deletes unused preset parameters from DME units in the selected device group, or from the

selected SP2060 unit.

NOTE

Presets used in a scene cannot be deleted.

NOTE

There is no [OK] button or [Cancel] button in the “Scene Manager” dialog box. To close the dialog box, click the [Close]

button at the upper-right of the dialog box.

Changes from storing/recalling scenes or editing, such as changing names or contents, will be applied immediately.

With the dialog box open, you can make the Designer window active and add components or change parameters.