User Manual

Références
Autres fonctions
Connexion à un
périphérique externe
Connexion
E/S audio
Connexion à
un ordinateur
Commandes
et connecteurs
Présentation
du satellite DME
Avant-propos
Références
DME8i-C/DME8o-C/DME4io-C Mode d'emploi
41
<DME4io-C>
Total Harmonic Distortion fs=48kHz or 96kHz
<DME8i-C>
<DME8o-C>
<DME4io-C>
Hum&Noise fs=48kHz or 96kHz, EIN=Equivalent Input Noise
<DME8i-C>
<DME8o-C>
Input Output RL CONDITIONS MIN TYP MAX UNITS
INPUT 1–4 OUTPUT 1–4 600Ω
input level: –60dBu, GAIN: –60dB +2.0 +4.0 +6.0 dBu
input level: +10dBu, GAIN: +10dB +2.0 +4.0 +6.0 dBu
Input Output RL CONDITIONS MIN TYP MAX UNITS
INPUT 1–8 OUTPUT 1–8 600Ω
+4dB@20Hz–20kHz, 20Hz–40kHz (fs=96kHz),
GAIN: –60dB
0.1 %
+4dB@20Hz–20kHz, 20Hz–40kHz (fs=96kHz),
GAIN: +10dB
0.05 %
+22dB@1kHz, GAIN: +10dB 0.015 %
Input Output RL CONDITIONS MIN TYP MAX UNITS
INPUT 1–8 OUTPUT 1–8 600Ω
+4dB@20Hz–20kHz, 20Hz–40kHz (fs=96kHz),
GAIN: +10dB
0.05 %
+22dB@1kHz, GAIN: +10dB 0.015 %
Input Output RL CONDITIONS MIN TYP MAX UNITS
INPUT 1–4 OUTPUT 1–4 600Ω
+4dB@20Hz–20kHz, 20Hz–40kHz (fs=96kHz),
GAIN: –60dB
0.1 %
+4dB@20Hz–20kHz, 20Hz–40kHz (fs=96kHz),
GAIN: +10dB
0.05 %
+22dB@1kHz, GAIN: +10dB 0.015 %
* Total Harmonic Distortion is measured with a 18dB/octave filter @80kHz.
Input Output RL CONDITIONS MIN TYP MAX UNITS
INPUT 1–8 OUTPUT 1–8 600Ω
Rs=150Ω, GAIN: –60dB
All input & output level controls: 0dB
–128
EIN
–127
EIN
dBu
–64 dBu
Rs=150Ω, GAIN: +10dB
All input & output level controls: 0dB
–82 –79 dBu
Input Output RL CONDITIONS MIN TYP MAX UNITS
INPUT 1–8 OUTPUT 1–8 600Ω
Rs=150Ω, GAIN: +10dB
All input & output level controls: 0dB
–82 –79 dBu