User Manual

Chapter 3 Main Panel Window

DME Designer Owner’s Manual

■ [Store] Button

Stores the contents of the current conﬁguration into the scene selected in the list. If an empty scene

is selected and the contents stored there, a new scene is created. If a scene is already stored in

the selected scene number, it will be overwritten. If [Conﬁrm Scene Store] is checked on the

[Application] tab of the “Preferences” dialog box, a conﬁrmation dialog box will be displayed

before the scene is stored.

When a scene is stored, the conﬁguration parameters at that time are saved as “preset

parameters.” Preset parameters are created automatically.

■ [Recall] Button

Recalls the scene selected in the list and makes it the current scene.

■ [Detail] Button

Expands the dialog box and displays a preset parameters list. If you click the preset parameters

list while it is displayed, the preset parameters list will be hidden. When the dialog box is opened,

its status will be the same as the last time it was closed.

NOTE

The currently logged on user can store scenes at a security level equal to or lower than his or her own only.

NOTE

When the computer and DME/SP2060 unit are online, a scene stored in the DME Designer will also be stored on the DME

or SP2060 unit, regardless of the DME or SP2060 settings.

The DME64N/24N utility display Misc. page [Scene Store] setting only affects store operation from the DME panel

controls.

NOTE

The currently logged on user can recall scenes at a security level equal to or lower than his or her own only.

NOTE

Not available for SP2060 groups.

[Detail] Button

[Del] Button

[Store] Button

[New] Button

[Del Unused] Button

Preset parametersList

DME

preset parameters

DME

preset parameters