User Manual

Chapter 3 Main Panel Window

DME Designer Owner’s Manual

Parameter Link Group List

Displays a hierarchical list of parameter link group and the parameters that belong to them.

When a parameter link group name is selected, the controls that belong to that parameter link

group are selected.

• Group Name

You can select a parameter link group name by clicking on it. Clicking the selected parameter

link group name again will select the characters in the name, allowing you to change it.

Clicking the plus (+) or minus (-) sign to the left of the parameter link group name displays or

hides items that belong to that parameter link group.

You can delete a parameter link group by selecting it and pressing the <Delete> key. You can

also delete a parameter link group by right-clicking on the parameter link group name and

selecting [Delete] in the context menu that is displayed.

• DME Icon

Displays the DME that includes the parameters that belong to a parameter link group. The

components can be displayed or hidden by clicking the plus (+) or minus (-) signs for the

DME icon. The parameters, Min, and Max can be displayed or hidden by clicking the plus (+)

or minus (-) signs for the component.

• Link

Click to turn ON or OFF. Turn OFF to disable parameter linking.

Component linking for multiple parameters can be turned ON or OFF via the contextual menu

that appears when the group name is right-clicked.

•Keep Offset

Click to urn ON or OFF. When “ON” the parameter offset is maintained so that when any

parameter in the group reaches its minimum or maximum value, further decrease or increase

is not possible.

Keep Offset for multiple parameters can be turned ON or OFF via the contextual menu that

appears when the group name is right-clicked.

•Parameter

Displays the parameters that belong to a parameter link group. You can display or hide

minimum and maximum values for a parameter by clicking the plus (+) or minus (-) signs.

You can delete a parameter from a parameter link group by selecting the parameter name

and pressing the <Delete> key.

NOTE

Components for user modules are also listed in a hierarchal display, but if user module security is enabled, the

components are not displayed. However, parameters displayed in the user module editor are displayed here.