User`s manual

132
CHAPTER2 PROFIBUS Unit
5) Press
DIO
(above in 4), and the screen will
be switched to the remote register mode.
Each remote register will be displayed in
the hexadecimal mode.
(Each register is indicated with 4 charac-
ters.)
The top row displays the statuses of
QWn+14, QWn+12, QWn+10 and
QWn+8 from the left.
The 2nd row indicates the statuses of
QWn+22, QWn+20, QWn+18 and
QWn+16 from the left.
The 3rd row indicates the statuses of
IWm+14, IWm+12, IWm+10 and
IWm+8 from the left.
The bottom row indicates the statuses of
IWm+22, IWm+20, IWm+18 and
IWm+16 from the left.
WI 00000000 00000000
FFFF1000 00000000
WO 00000000 00000000
00000000 00000000
6) Press
DIO
above in 5), and the screen will
be switched to the parallel input/output
status mode again. Hereafter, each push
of
DIO
will switch the screen.
To return to the original screen, press
ESC
.
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
7) Press
F2
(OPRT) in the initial screen
to display the serial input/output statuses
in the OPRT screen.
[MENU]
select menu
1EDIT2OPRT3SYS 4MON
8) Press
F2
(STEP) or
F3
(AUTO).
The step operation screen is explained in
the subsequent steps.
[OPRT]
select menu
1ORG 2STEP3AUTO
9) Press
F4
(next) 2 times to switch to the
function table, and then press
F2
(SIO).
[OPRT-STEP] 100 0: 0
001:MOVA 254,100
[ 0.00, 0.00]
1MI0 2SI0 3 4next