User`s manual

CHAPTER2 PROFIBUS Unit

2-10-3 JMPB

Function: Jumps to the specified label when the specified general-purpose input or

memory input or serial general-purpose input is on (or off).

Format: JMPB <label No.> <DI or MI or SI No.> <input status>

Example: JMPB 12,8,1

Jumps to level 12 when D18 is ON. If not, proceeds to the next step.

Explanation: JMPF is a command to control the program flow according to the gen-

eral-purpose input or memory input or serial general-purpose input.

(1) Label No.

The label No. is a number defined by the character L, and signifies

the jump destination. This number can be specified from 0 to 255.

(2) DI or MI or SI No.

Specify 1 number from among the general-purpose inputs 0 - 15 (16

points)* or memory input 100 -147 (48 points) or the serial general-

purpose inputs 200- 231 (32 points).

(3) Input status

Here, “1” means ON, and “0” means OFF.

* 0 to 7 (8 points) for the SRCP/SRCD series controllers

2-10-4 DO

Function: Turns the general-purpose output or memory output or serial general-

purpose output on or off.

Format: DO <DO or MO or SO No.> <Output status>

Example: DO 3,1

Sets DO3 to ON.

Explanation: The DO command turns the general-purpose output or memory output or

serial general-purpose output ON or OFF.

(1) DO or MO or SO No.

Specify one from among the general-purpose outputs 0 - 12 (13

points)* or memory output 100 -131 (32 points) or the serial general-

purpose outputs 200- 231 (32 points).

(2) Output status

Here, “1” means ON, and “0” means OFF.

* 0 to 4 (5 points) for the SRCP/SRCD series controllers