Network Board User's Manual
Table Of Contents
- INTRODUCTION
- Contents
- CHAPTER1 Cautions To Ensure Safety
- CHAPTER2 Ethernet Unit
- 2-1 Ethernet unit features
- 2-2 How data is exchanged
- 2-3 How to connect to Ethernet
- 2-4 Making system settings for the controller (server)
- 2-5 Making the PC settings (client)
- 2-6 Checking the connection with “ping”
- 2-7 Using TELNET
- 2-8 TELNET dedicated parameters
- 2-9 TELENET communication commands
- 2-10 Making a connection with TELNET.EXE
- 2-11 Other operating tasks
- 2-12 Message List
- 2-13 Troubleshooting
- 2-14 Specifications
- 2-15 Supplement
40
CHAPTER2 Ethernet Unit
■ Example 3
In this example, the control PC and the controllers are separated from each other.
* The 10BASE-5 cable has a maximum length of 500 meters. However, this distance can
be extended to a maximum of 2.5 kilometers by connecting cables together and using
repeaters, etc.
PC Controller
Terminator Terminator
Transceiver (MAU)
10BASE-5 cable
Transceiver (MAU)
Transceiver cable (AUI cable)
Transceiver cable (AUI cable)
HUB with 10BASE-5 connector
HUB with 10BASE-5 connector
PC
Controller 1
Controller 2
Controller 3
IP address
192.168.0.2
192.168.0.3
192.168.0.4
192.168.0.5
Subnet mask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Gateway
192.168.0.1
192.168.0.1
192.168.0.1
192.168.0.1
System setup example