Owner's Manual

63 User preferences
Depending on which audio outputs are used, you can select the settings in this menu.
If you only use the analogue audio output ( AUDIO L, R ), select the settings “ Off ” in
the “ Digital output ” menu.
“ Digital output ”
For devices connected to the DIGITAL AUDIO OUT socket, you can select from
the following settings.
“ All ” : Unalterned signals of Dolby Digital and DTS are fed to the digital out-
put. MPEG-2 multi-channel signals are converted to PCM (Pulse Code
Modulation).
For receivers/amplifiers with digital multi-channel sound decod-
ers .
“ PCM only” : Dolby Digital and MPEG-2 multi-channel signals are converted to PCM
(Pulse Code Modulation).
For receivers/amplifiers without digital multi-channel sound
decoders .
“ Off” : Digital output switched off.
For devices with analogue audio input .
“ Analogue output ”
For devices connected to the analogue audio output ( AUDIO L, R ), you can select
from the following settings.
“ Stereo ” :For devices without DolbySurround, use this setting if the DVD
recorder is only connected to a stereo TV set.
“ Surround” : Dolby Digital and MPEG-2 multi-channel are mixed down to a DOLBY
surround-compatible two-channel output signal. For devices with
Dolby Surround Pro Logic decoder .
“ Night mode ”
Night mode optimises the sound for playback at low volume. You are therefore less
likely to disturb your neighbours. This only works for Dolby Digital audio on DVD
video discs.
You can choose the following settings in this menu:
“ Playback audio ”
Playback audio language
“ Recording audio ”
A choice between Language I and II
“ Subtitle ”
Subtitle language
“ Menu ”
Screen menu language
“ Country ”
Automatically displays names of broadcasters in your country
Sound settings
Language settings
n
Digital output All
Analogue output Stereo
Night mode Off
Sound
n
Playback audio English
Recording audio Language I
Subtitle English
Menu Einglish
Country Others
Language
DRX-2_G.book Page 63 Tuesday, October 14, 2003 5:02 PM