Owner's Manual

ManualsBrandsYamaha ManualsDVD-playersDRX-730

Chapter 3: General Functions

21 En

English

To display the time or program the timer, you must

first set the clock.

1 Press TIMER.

“Set Clock” appears on the display for a few

seconds, and then the message “Press and hold

ENTER key for 3 sec.” scrolls across the display.

If the clock has already been set, “Clock Time” will

appear on the displayed for a few moments, then

the time will be displayed.

2 While the message is scrolling across the

display, press and hold down ENTER for 3

seconds until the hours display starts flashing.

3 Use Up/Down ( / ) to set the hours.

The hours can be set from 0 to 12, AM or PM. On

some models, the default hours display uses the

24-hour clock.

4 Press Right ( ). The minutes display starts

flashing.

5 Use Up/Down ( / ) to set the minutes.

Use Left/Right ( / ) to toggle between the hour

and minute displays if necessary.

6 Press ENTER.

The time is set and the display stops flashing.

Notes:

•To switch between 12- and 24-hour clock, while

the time is being displayed, use Left/Right ( / ).

•If the power cable is disconnected or there’s a

power failure, the clock will continue working for

approximately 5 minutes. But beyond this, the

time setting will be cleared.

Setting the clock

VOLUME

TIMER SLEEP

MUTE

DOCK

TUNER

MEMORY

SOUND

DVD/USB

PURE DIRECT

AUX/PORTABLE

DISPLAY

DIMMER

PRESET

INFO.

TOP MENU

SETUP

RETURN

AEAE

ENTER

BAND

AUTO/

MANUAL

ENTER

TIMER