Owner's Manual

36 En
This chapter explains how to use the tuner to listen to
your favorite radio stations and how to store them as
presets.
■ Tuner display indicators
The following display indicators are used for tuning
and presetting radio stations.
A TUNED
Lights up when tuned in to a radio station.
B PRESET
Lights up when selecting radio presets.
C STEREO
Lights up when listening to an FM station in stereo.
D AUTO
Lights up when Auto Tuning mode is selected. Goes
off when the Manual Tuning mode is selected.
E MEMORY
Lights up when presetting radio stations.
F Preset number
Displays the preset number.
G Band
Displays the band (FM or AM).
H Frequency
Displays the frequency.
You ca n tune in to radio stations automatically or
manually.
In Auto Tuning mode, the DRX-730 searches for
radio stations automatically.
1 Press TUNER to select the TUNER input source.
2 Press BAND repeatedly to select FM or AM.
3 Press AUTO/MANUAL repeatedly to select
Auto Tuning mode (AUTO indicator on).
In Auto Tuning mode, the AUTO indicator on the
display in on.
4 To search for stations higher up the frequency
band, press Up ( ). To search for stations
lower down the frequency band, press Down
().
The tuner searches for the next available station.
When a station is found, searching stops and the
TUNED indicator on the display lights up.
The STEREO indicator on the display will light up
when tuned to a stereo FM Station. If the signal is
weak, reception may be in mono.
Notes:
•If auto tuning doesn’t find some of the weaker
stations in your area, try using manual tuning.
•If stereo FM reception is noisy, press
AUTO/MANUAL to select Manual Tuning mode
and listen in mono.
Chapter 5: Using the Tuner
MEMORY TUNED
STEREO AUTO PRESET
F
G
H
B
A
E
C
D
A1 FM 100.1 MHz
Tuning in to radio stations
Auto tuning
VOLUME
MUTE
DOCK
TUNER
MEMORY
SOUND
DVD/USB
PURE DIRECT
AUX/PORTABLE
PRESET
MENU
INFO.
TOP MENU
SETUP
RETURN
AEAE
ENTER
BAND
AUTO/
MANUAL
AUTO/MANUAL
BAND
TUNER
AA
AA
MM
MM
77
77
00
00
00
00
kk
kk
HH
HH
zz
zz