Owner's Manual

Chapter 7: Portable Device Playback
48 En
3 Use the DRX-730’s remote control, or the
Bluetooth device’s controls to play the music
stored on the Bluetooth device.
To disconnect a Bluetooth device and make the
DRX-730 non-discoverable, press BLUETOOTH
OFF. The message “Disconnected” appears on the
display.
To connec t to another Bluetooth device, you must
first disconnect from the currently connected device,
and then initiate a connection on the other Bluetooth
device.
■ Playback control
The following DRX-730 remote control buttons can
be used to control playback on a Bluetooth device.
Point the remote control at the DRX-730, not the
Bluetooth device.
Notes:
•The DRX-730’s remote control can only be used
to control a Bluetooth device while its connected
to that device.
•Even if several devices have been registered
through pairing, if the last connected Bluetooth
device is not found, the Yamaha YBA-10 will not
attempt to connect to any of the other devices.
•The DRX-730 will automatically disconnect from
the currently connected Bluetooth device when a
disconnection is initiated on that device,
communication becomes impossible because the
device is too far away, or the DRX-730 is set to
standby.
•The Bluetooth device will not be disconnected
when a different input source is selected on the
DRX-730.
•The Yamaha YBA-10 only supports Bluetooth
music players and mobile phones that are
compatible with A2DP or AVRCP.
•Bluetooth has a line of sight operating range of up
to 10 meters (33 ft.). Make sure there are no
obstacles between the Yamaha YBA-10 and your
Bluetooth device.
Button Description
Play ( ) Starts playback
1
1. Depending on the Bluetooth device, the Play and Pause
buttons may work as Play/Pause buttons.
Pause ( ) Pauses playback
1
Stop ( ) Stops playback
Next ( ) Selects the next track
Previous
()
Selects the beginning of the current
track. Press again to select earlier
tracks.